• 30Nov

    Smart phones are becoming more intense competition in the market. As before, we have reported an increasing number of systems in smart phone operating in their efforts to expand its market share, while manufacturers are also working to improve their market share in smartphones. A growing number of smart phones sony VGP-BPS13/S battery  available, and more powerful profile ever higher, all showed that the smartphone market is growing rapidly.

    However, the smartphone does not develop in a smooth vessel. Despite the rapid development of science and technology, application of more and more new technologies for the mobile space has been greatly improved user experience, but there are still bottlenecks in phone technology Mobile. The battery technology is one of the most important.

    Compared with ordinary mobile phones, smart phones tend to be more than the normal configuration of the cell phone hardware, but more features with smartphones have a higher frequency of use. This means that the power consumption of the smart phone is all the greater. Given the size of the touch screen to generalize the Internet more and more application-oriented, smart phones continue to increase as changes in electricity consumption.

    Incompatible with this development is the technology of cell phone battery has not made a major breakthrough. The current battery capacity smart phone and a few years ago to promote the choice is rather limited, their life is difficult for the user satisfaction. According to the author’s knowledge, there are many smart phone users need to charge the battery sony VGP-BPS9A/B battery every day.

    Nokia Research Center Henry Tirri said in an interview in the near future, we must go through several years, breakthroughs in related technologies, the battery life of the smartphone is possible to achieve “good” level. Henry Tirri that the batteries of mobile smart phones “good” level refers to the ability to use a single charge of about a week, but now many high-end machine with large screen smart than eight hours of continuous use.

    The short-term cell technology phone battery, there is no breakthrough

    Deficiencies in battery technology for operators and manufacturers have an effect. Users may be reluctant to buy a wait time is very short smartphone, but it also limits the use of users of smartphones to deliver applications over the Internet.

    Henry Tirri said that, as a basic function of the phone is the voice and intelligence, the study on the management of cellular phones power is mainly directed against the optimization. But in the last two years with the rapid development of mobile phone technology, the emergence of greater power consumption sony VGP-BPS9A battery and faster processors and larger screens brighter, and with the “cloud” generation concepts, many applications need connected to the Internet server, which also takes a lot of power, however, the battery does not keep pace with the study of trends.

    Due to the limited size and taking into account safety factors, the current capacity of lithium batteries used in mobile phones is difficult to have too many things to improve, handset manufacturers and battery manufacturers are looking for new battery technologies, including the use of solar energy, kinetic energy and so on. However, currently, these technologies have no real breakthrough is not yet widely used. ABI Research, said Michael Morgan, Smart mobile phone battery for a breakthrough involves a lot of technology, while these technologies are related, each technology must wait until the related technology.

    Thus, in the enjoyment of smart phones faster, more feature-rich at the same time within a period of time, smart cell phone users must still endure the pain can not be sustained. And if this situation sony VGP-BPS9/S battery does not improve as quickly as possible, then perhaps the development of the smart phone industry, a significant impact.

  • 29Nov

    Comtec Solar Silicon Wafer manufacturers and Taiwanese manufacturers of new solar photovoltaic cells (Neo Solar Power) jointly developed a new silicon-based monocrystalline silicon cells.

    Traditional silicon solar cells generally use a cut off corners of the pseudo-square structure. Cut off only a small part of the corner.

    Comtec Solar, said that their “Perfect silicon chip,” can make the battery chips and components producers to increase the size of photoelectric conversion, thereby generating capacity will be increased by 3%, conversion efficiency up to 17.8%.

    The new daylight that the introduction of the technology, can reduce the light-induced loss, and very easy to chip output power of the battery upgraded to 250 watts.

  • 27Nov

    “Top Ten Science News” Award is part of “Global Science” magazine ( “Scientific American” magazine Chinese version) a major highlight of each year, starting in 2006, this year is the fourth selection. 2009 annual “top ten science stories,” named “Global Science” magazine and co-creation of Sina online selection stages. The following candidates News:

    5, ultra-high-speed rechargeable battery

    In March 2009, the U.S. Massachusetts Institute of Technology scientist Cedal and his colleagues developed a revolutionary mobile phone batteries, and recharge time takes a few hours compared to the ordinary battery, this battery can be just 10 seconds to the completion of charging a new battery charging speed is 100 times that of traditional batteries, 2 to 3 years can be used in mobile phones, laptop computers, iPod, digital cameras and cameras. In addition, the same technology can significantly reduce the electric car charging time, it can fill the car with the traditional time for comparable, thus wiping out green cars facing one of the biggest obstacle.

    Battery charging or discharging is slow is because the lithium-ion flow from one electrode to another electrode take some time. The researchers will be made of lithium iron phosphate structure of the traditional electrode surface to be improved, so that lithium-ion release and inhalation speed greatly improved the original 100-fold. Advantage of this new battery prototype made of only 10-20 seconds to complete the process of charging or discharging. In contrast, a considerable volume of ordinary batteries need charging 6 minutes to complete.

    And other battery materials are different, the new material does not repeat the charge and discharge with aging. Scientists said that the battery can be charged faster to use two consecutive years or 3 years. Cedal said: “The charge and discharge time in seconds rather than hours of battery may be calculated for the new technology opens a door and will also change people’s way of life.” Moreover, this technology can also be used to develop a new generation of volume smaller, lighter batteries, mobile phones and laptop batteries heads only the size of a credit card.

  • 26Nov

    They often use laptop will produce some errors, the following list I would let you use the battery a few mistakes, and I hope everyone is in use in time to avoid.

    1. Full power to unplug the power

    In the notebook computer battery is fully charged circumstances, should no longer be using a laptop computer external power supply. Because in the case of loading the battery using a laptop computer, in fact are in a re-charge the battery when the use of the state. In addition to reducing the battery life of things, using both AC and battery, the machine can also cause overheating, it is very easy to damage the other components.

    2. A long time do not use the battery
    While connected to an external power source should not use the battery, but a long time without using the battery approach is also wrong, the need for regular battery capacity to activate the appropriate use appears to be more accurate. In particular, each time when you should pay attention to the use of the battery re-charging the battery runs out, but try not to without full power, unplug, have already been filled with power, it should be a separate battery or power adapter and not be shared use.

    3. Often the battery discharge

    Do not remove the battery often, nudity battery position, this large amount of dust caused by easy access when using the battery connection is bad, the battery should be noted that when the demolition dust waterproof moisture shock, regular position at right with a small brush to clean.

  • 25Nov

    “Bought a new universal charger (referred to as ‘universal charge’), the cell phone batteries ‘charge’ played a big package.” November 23, who lives in North Street, Lee accessible to the newspaper reflected that he plans to buy cheaper of the poor quality of the “universal charge”, the results of his own original cell phone battery charging and bad.

    Mr. Lee told reporters that he lost last week, mobile phone charger, November 20 afternoon, Xinhua street wife an electronics store and spend 10 yuan to buy a mobile phone “universal charge.” Take it home and charge their cell phones three hours later, they found the battery on the drums in a big package, installed in the mobile phone is not even the back cover are built on, but also they can not machine. There was still depressed, because the battery , he can only throw away this piece worth nearly hundred of original equipment batteries.

    Reporter visited learned, at present, the market’s “universal charge” price is usually in the 8-20 yuan, sales are not low. A cell phone store for Chan staff said that due to different brand mobile phone battery voltage and current are different, the same standards of voltage, current charge, or charge dissatisfied, or would have an impact on battery life and safety. Some low-cost “universal charge” most of “three noes” products, there is a big security risk. General formal charge mobile phone charger will be marked with a voltage, current standards, but such “universal charge” is not, its internal circuitry is very simple and not designed to over-voltage protection device, the event of excessive voltage or short circuit, it is easy damage the battery internal circuitry, the battery charge drum pack, or even an explosion.

  • 23Nov

    In June 2009, a news aroused our attention: Sony Corporation announced the six models of mercury-free alkaline button batteries (LR) of the commercialization plan, which means that Sony’s mercury-free button batteries will be fully the market.

    In fact, as early as eight years ago, China’s New Leader Battery Co., Ltd battery business had been a breakthrough ahead of other countries that plagued the world’s problems, and was the first conducted a large-scale dell Inspiron 1501 battery production.

    Mercury batteries inside has a great harm to humanity, because the battery inside the mercury on the brain and nervous system toxin significantly interfere with the normal work of nerves, fetal or infant exposure to high doses of mercury can cause mental retardation, cerebral palsy, hearing impairment, or vision loss and so on. Even exposure to low doses of mercury, may also affect children’s healthy development, it may allow them to generate attention, action coordination, language skills, visual-spatial, and text memory problems. For adults, chronic mercury poisoning can lead to memory decline, seizures, vision loss, and the hands, feet mean paralysis, as well as fertility and the pernicious effects of blood pressure. Increasing evidence also shows that mercury exposure may increase heart disease.

    And because the battery of a high frequency of use and universality, making the threat of mercury-containing batteries become more prominent. It is reported that a New Zealand-style micro-mercury alkaline batteries dell Inspiron 1520 battery can be contaminated water is 600,000 liters, equivalent to the amount of drinking water a person’s life.

    In other countries, more than a decade in Japan and the United States, Europe and other well-known battery manufacturers of mercury-free button cell mercury-free overtaken by a large number of studies. However, there are technical problems are not resolved, there is no one company can successfully produce mercury-free alkaline button batteries, resulting in the global market has been the use of mercury-containing alkaline button batteries. Button cell 1 billion each year by the production and use, so that China and the rest of the world people are still faced with the danger of mercury exposure.

    While all research work to a standstill, when this problem by the new company’s break-qing Li Dade. In this regard, China Battery Industry Association and the American environmental groups have given a high degree of recognition and evaluation, considered to be the cause of the world’s great contribution to environmental dell Inspiron 1521 battery protection. With the invention of this technology, China has become the world’s first mercury-free button batteries cracking problems of the country.

    It is understood that the reasons for mercury button batteries, mercury is used to block the battery anode zinc cream with pieces of metal anode contact, because such contacts will produce hydrogen gas, leading to cell swelling deformation, leakage or even explosion. Early mercury button cell battery leakage problem also exists, which is affecting performance, battery life and the use of the most fatal flaw, but as early as the late 70s of last century, mercury-containing button battery leakage problems, they have been passed to the original usage of “Punch made with thin steel plate and then nickel-plated or gold,” the negative cover, replaced by a “from nickel, stainless steel, copper composite rolling made the ‘composite metal band,’” made negative cover, and other related improvement measures to be effectively controlled.

    The purpose of this patented invention, is to maintain the original mercury (ie mercury) button batteries of anti-leakage performance of the same, based on mercury-free button batteries.

    The patent on October 19, 2001 by the State Intellectual Property Office to the patent application, and in October 2, 2002 announcement was authorized by the patent No. 01,234,722.1.

    With the mercury-containing button cell battery usage and the growing volume of waste, waste batteries, mercury pollution of the environment becoming increasingly serious. Thus, out of need for environmental protection, button cell battery manufacturing industry has been eager to resolve the dell Inspiron 1525 battery in the mercury problem. In this patent application, Sony, Toshiba, Hitachi, Panasonic, Seiko, etc. at the button battery R & D and manufacture of industry-leading position among the Japanese companies, are mercury-free button batteries to resolve the issue for a variety of attempts and efforts to put forward all kinds of technology solutions. All of these technical programs are committed to address the mercury-free leakage caused by the new problem, but has failed to effectively meet the mercury-free technology and anti-leakage effect of both. Therefore, this patent application until a few days ago, button cell battery manufacturing industries can in fact have not effectively address both mercury-free and also the technology of anti-leakage problem, and thus mercury-free button batteries have yet to really realize the industrialization and market access.

    This patent research and development through the use of unconventional ideas, successfully resolved the distress button battery manufacturing industry for many years technical problems. Before the date of this patent application, all address the issue of mercury-free technology to improve the program, are in the existing technology base in order to mitigate the negative climbing (ie, leakage) speed commonly used by nickel - stainless steel - made of copper to suppress three-layer composite dell Inspiron 1526 battery plate made of metal anode cap based on an improved, all of which improve the programs do not relate to the negative laminate cover any change in the structure itself, even in the knowledge that negative covered laminate structure forming the dislocation occurs and thus damage the coating used in its suppression of hydrogen produced by indium or tin plating and cause the battery case of the inflatable and the leakage is still only proposed many other complex “plugging” program, but did not give any regard to the availability covered by changing the negative laminate structure to solve this problem the technical inspiration.

    And this patent is another way, its R & D and set aside the idea of super-normal manner by the existing technology made of three layers of metal composite plate anode covered with a laminate structure, but directly by the metal plates or sheet made of stainless steel anode on-chip “in gold, silver, copper, tin, indium and other tests and found that the negative on-chip indium or tin-plated success in controlling the battery anode zinc cream in contact with the anode film produced gas, together with the improvement of raw materials and formulations on the success of to produced the mercury-free alkaline zinc-manganese, zinc / silver manganese button-type batteries. based on the discovery, the completion of the present utility model. ”

    In this patent the technical program, in order to better in the negative on-chip indium or tin plating, and the elimination of a single coating of the pinhole prone to problems presented in this patent by iron plates or stainless steel sheet made of negative film naked on-chip first electroplating nickel or copper, made of “has electroless nickel or copper, battery anode film,” and then chip in the battery anode indium or tin plating.

    The use of the patented technology, the program produced mercury-free button batteries, in 2002, that had been successful in the realization of industrial production, the product of mass entering the market, is purchasing the use of well-known enterprises such as McDonald’s, and received praise from environmental groups about the United States, achieved a Sony, Toshiba, Hitachi, Panasonic and other multinational efforts for many years failed to achieve the technical objectives for the protection of ecological environment of mankind has made a strong contribution.

  • 22Nov

    The new energy automotive battery industry: the Sino-US joint cooperation in electric vehicle battery promising innovation varieties (research report)
    Sino-US joint cooperation in electric vehicles, promising innovation cell types - Comment Obama’s visit to China-US Joint Statement, Sino-US joint statement: I agree in the next five years, Sino-US Joint Research Center of clean energy investment of at least 1.5 billion U.S. dollars, funded half of the two countries, in the two countries set up a headquarters sony VGP-BPS8A battery. Priority research topics will include building energy efficiency, clean coal (including carbon capture and storage), and car cleaning. The two sides welcomed the launching of the Sino-US electric car initiative, the two countries in the next few years, several 1 million electric cars in use. Based on the Sino-US cooperation in the field of electric vehicles, huge investment, the two governments announced 10 joint demonstration projects in several cities, and efforts to develop common technical standards to promote the rapid growth of this industry scale. Both sides agreed that China’s rapid use of clean vehicles have a lot of common interests. Comments:

    Sino-US joint energy cooperation far-reaching significance. Two of the world’s largest energy consuming country, work together to develop building energy efficiency, clean coal and clean cars, on behalf of the clear energy technologies and new energy applications in the world’s most extensive of the two largest market has gradually been research sony VGP-BPS8 battery, development and market-oriented applications. This is a landmark event, the world’s largest developed country and the largest developing country, work together on new energy applications will have the world’s developed and emerging countries in the new energy technology cooperation, serve as a model. The next decade, the world will usher in a new energy era.

    The new energy vehicles between the two countries to improve planning objectives. Two clear “to be in the next few years, several one million electric cars in use”, which is two heads of state the latest position of new energy vehicles. The original “Automobile Industry Promotion Plan” proposed that the new energy vehicles in 2012 accounted for 5% of total production of vehicles, about 50 units; while Obama came to power when the new energy declaration, made in 2015, the United States to achieve domestic production of new sony VGP-BPS9 battery Energy Car 1 million. The new position shows that the two countries in electric vehicles are likely to speed up the planning objectives, the domestic industrialization process may be accelerated.

    Technical cooperation is conducive to speed up the industrialization process. The two sides that “in several cities in the 10 joint demonstration projects, and efforts to develop common technical standards to promote the industrial scale and rapid growth.” We believe that the current four-pole in the car, China, the United States, Japan and Germany each one pole, power battery technology have once again the United States, Japan and the most advanced. Sino-US cooperation means that the sony VGP-BPS9/B battery Chinese power battery R & D technology possible to quickly and international standards, the future does not rule out lithium batteries giant A123 and other U.S. joint-venture plant in China to enter China’s huge electric car market. And common technical standards for electric cars in favor of domestic to international standards (including the charging voltage, current, etc.) into the global market and avoid detours.

    Future subsidy policy, and the localization rate is likely to hook. In our view, development strategies, national aim is to use new energy vehicles as an opportunity to catch up from behind their own technology. We believe that the Sino-US cooperation, China will continue to insist on independent R & D path. Possible future introduction of new energy car allowance standards, and key spare parts localization rate will be linked to, and encourage the autonomy of key parts as soon as possible and the basis of the localization of raw materials. At the same time the state will improve the access threshold, and rigorous product review system.
    Follow-up policy can be expected. We believe that the follow-up to relevant state ministries and commissions, will be introduced to encourage large-scale electric vehicle applications and the development of specific incentive policies. The industrialization of new energy vehicles, including the most important policy for consumers to buy new energy vehicles are subsidized, and the development of new energy vehicles and infrastructure planning. Introduction of these two policies that will address bottlenecks in consumption and the use of the bottleneck is a new energy vehicles a prerequisite for large-scale heavy volume sony VGP-BPS9/S battery.

    Promising varieties of independent innovation of automotive batteries. We are optimistic about the next new energy policies to promote investment opportunities in automotive battery industry, we believe that the next 3 to 5 years, Ni-MH battery HEV will remain the mainstream of new energy vehicles, HEV will PHEV, EV co-existence about 10 years. In the 3 ~ 5 years later, with the yield increase lithium iron phosphate batteries to bring the cost down, as well as the national network of charging stations gradual establishment of lithium iron phosphate batteries as the main driving force of the PHEV, EV will usher in a broad development prospects.

  • 20Nov

    Foreword battery is a UPS system, an important component of a direct bearing on the merits of the entire UPS system reliability. No matter how UPS designed for advanced features complete how, once the battery failure, even the best UPS is also unable to provide uninterrupted power supply. Do not use cheap and inferior quality due to covet lead-acid batteries dell Inspiron 6400 battery, it will affect the whole UPS system reliability, and will therefore result in greater losses. The entire UPS system batteries mean time to failure (MTBF) the shortest part. If the proper use and maintenance, will be able to extend its life, instead of its service life will be shortened. Therefore, we must understand the basic principles and the use of battery considerations.
    Two general types of lead-acid batteries batteries can be divided into lead-acid batteries, maintenance-free lead-acid batteries and nickel-cadmium batteries, taking into account the load conditions, the use of the environment, life and cost and other factors, UPS usually selected VRLA-free maintenance of batteries. Its main feature is the charge generated when the cathode-board oxygen through chemical reaction in the negative plate reduced to water, use the specified float lifetime without adding water to maintain hp PB995A battery, so-called maintenance-free lead-acid batteries. Maintenance-free battery is only when compared with the normal use of the process eliminates the need to add water or distilled water, adjust the electrolyte surface of the work is not relieved of all maintenance work. On the contrary, in order to achieve the UPS uninterrupted power supply, we must be more careful in safeguarding and maintenance of a good lead-acid maintenance-free batteries.

    Three main factors affect the life and cautions us about the following major factors affecting battery life and the use of the process should pay attention to matters:

    ⑴ ambient temperature greater impact on the battery. The ambient temperature is too high, the battery will overcharge produces gas, the ambient temperature is too low, then the battery will charge enough, it will affect battery life. Therefore, the general requirements of the ambient  temperature at 25 ℃ or so, UPS also operate float voltage temperature setting. Practical applications, the battery is generally 5 ℃ ~ 35 ℃ within the charge, below 5 ℃ or above 35 ℃ will greatly reduce the battery capacity and shorten battery life.

    ⑵ depth of discharge of the battery life also has great influence. The deeper the battery depth of discharge, the fewer the number of its recycling, and therefore should avoid thecompaq EVO N400c battery use of depth of discharge. Although the UPS has a battery low potential protection, the general single-cell, when discharged to 10.5V or so, UPS will automatically shut down. However, if the UPS is in light-load or no load discharge discharge cases, may cause the battery depth of discharge.

    ⑶ batteries in storage, transportation, installation process, a result of loss of part of the self-discharge capacity. Therefore, after installation before put into use should be based on the open circuit voltage of the battery to determine the remaining battery capacity, then a different approach to supplement charging of the batteries. Set aside for spare batteries, every 3 months should be a supplementary charge. Can be by measuring the battery open circuit voltage to determine if the battery is good or bad. To 12V battery, for example, if the open circuit voltage is higher than 12.5V, the battery energy storage, said there are more than 80%, if the open circuit voltage lower than 12.5V, you should immediately supplement charge. If the open circuit voltage less than 12V, the battery stores electrical energy, said less than 20%, the battery unserviceable.

    ⑷ battery charge and discharge currents generally C expressed, C the actual value related to battery capacity. For example, 100AH batteries, C = 100A. Matsushita Lead-acid maintenance-free battery charging current is 0.1C best around, the charge compaq EVO N410c battery,compaq EVO N400 battery current can not exceed 0.3C. Charge current is too large or too small will affect the battery life. The discharge current general requirements in 0.05C ~ 3C between, UPS in normal use can satisfy this requirement, but it should also prevent the occurrence of unexpected situations, such as the battery short-circuit and so on.

    ⑸ charge voltage. As part of UPS battery backup works, electricity is in charge state under normal circumstances, only the power outage will discharge. To extend battery life, UPS chargers generally use the constant pressure limiting control over the way, the battery is full to float charge after state, each section about float voltage is set to 13.6V. If the charging voltage is too high will cause the battery before charging, the battery will charge less than the contrary. Charging voltage anomaly may be caused by configuration errors caused by the battery or charger malfunctions due. Therefore, when installation of the battery, the battery must pay attention to the correctness of the specifications and quantities of different specifications, different batches of cells do not mix. Do not use inferior charger plus a charger, but also to consider when installing heat dissipation problem. At present, in order to further improve the battery life, and advanced UPS have adopted a kind of ABM (Advanced Battery Management) three-stage intelligent battery management program, that is, charge is divided into initialization charge, floating charge and rest three stages: the first stage is constant flow equilibrium charge, charge the battery capacity to 90%; second stage is floating Chong Chongdian charge the battery capacity to 100%, and then stop charging; third stage is a natural discharge, at this stage, the battery using its own leakage current discharge, until the minimum voltage required, and then repeat the above three stages. In this way the kind of changes that were previously fully charged even after the battery in the 24h day of the float state, thereby extending battery life.

    ⑹ As a result of maintenance-free battery electrolyte absorption system, in normal use will not produce any gas, but if the user used improperly, causing the battery before charging, it will produce gas, this time pressure will increase the battery, the battery pressure valve on top of open, serious cause battery burst.

    ⑺ UPS running the process, pay attention to monitor the battery terminal voltage value, float current value, each battery voltage, battery and the DC bus to ground resistance and insulation status.

    ⑻ not individually increase or decrease in the number of single cell battery load, which will result in the capacity of single battery charge imbalance and uneven one, reduce battery life.

    ⑼ the battery should be installed as far as possible in a clean, cool, ventilated, dry place, and to avoid sunlight, heaters or other heat sources of radiation effects. Batteries should be placed on positive legislation, non-tilt. Each battery should be firmly connected between the terminals. ⑽ regularly maintained. The battery in use after a certain time should be regularly inspected, such as observations of their appearance is abnormal, measurement of the battery voltage is the average and so on. If you are not a long-term power outage, the battery will always be in a state of charge, this would allow the activity of the battery deterioration. So, even if power outages, UPS is also needed on a regular basis to keep the battery discharge test in order to make active. Discharge test can generally be carried out for three months time, practice is UPS with a set - preferably 50% or more, and then disconnect the electricity, so that UPS is in battery discharge status, discharge duration, depending on battery capacity is usually in terms of a few ms to tens of ms, discharge to resume electricity supply, continue to charge the battery.

    Conclusion and clearly understand the impact of lead-acid battery life of the main factors and the use of the process should pay attention to matters in our UPS system, the proper use and maintenance of lead-acid batteries are a great help. Hope that in their daily work, the proper use and maintenance of a good lead-acid batteries so that it can get a more rational use.

  • 19Nov

    We have to eliminate fuel cars pollute the environment and the development of new energy vehicles, but used in the production and recycling process of batteries pollution affect human health, it worth it?

    Fuel cell, hybrid, pure electric three series of new energy vehicles, in addition to hybrid cars need to use oil, the rest do not have oil. The former with hydrogen, the latter with the electric, it has been known as green products (hybrid can cut exhaust emissions).

    It is envisaged that the battery charging power from hydro, wind, sunlight, nuclear energy electric power, thermal power is also the valley at night to use their power. This green and renewable sources of electricity, of course. Hydrogen from renewable electricity production. Of course, the hope that one day these ideas can become reality. Three series of cars need to use battery power storage of electricity, or auxiliary drive vehicles, or the main drive vehicle. The battery is currently the industry’s main strategy lithium battery. In the hybrid with the original nickel-metal hydride battery-based, pure electric vehicles using lead-acid battery Uehara.

    Now the industry for several batteries or controversial, which one is better then both merits and demerits. Li-ion battery power than the energy than the big, fast charging fast discharge can adapt to a very large temperature range. In recent years, a greater performance increase, the cost has decreased substantially, people placed great hopes. However, a relatively large number of constraints, is a developing technology, research and development who need to tackle key problems
    Lithium resources of the world reserves of 15 million tons, China about 390 million tons, accounting for about 28% of the world’s total, ranking second in the world. It is estimated that, 1g lithium metal rechargeable batteries can be about 0.6 ~ 0.8Wh, (and synthesis of cathode materials related to the materials and synthetic negative related to the performance of the electrolyte and synthetic).

    To a compact car, for example, electricity consumption per 100km driving about 15 units of electricity, renewal line mileage of about 150km or so, its lithium battery storage capacity in the 30kW / h ~ 35kw / h or so, the group lithium batteries lithium metal content in the 50kg above, equivalent to about a cell phone battery (rechargeable batteries 3.5Wh) of 10000 times. 121 Beijing Road, a model of pure electric passenger big, its total storage capacity of lithium battery is said to 160kW / h, total weight about 2 tons, its lithium metal content is about 280kg or so.

    Toyota Prius hybrid is the use of nickel-metal hydride batteries, but the storage capacity is not. Small reserves of nickel, is used in electroplating, coinage, stainless steel must be material. Lead-acid batteries oldest and most mature, maintenance-free type has been widely used in a large number of electric two-wheeled vehicle, the charge can also be 3C-current charge and discharge can be 2 hours and the rate of current discharge. Lead is rich in resources, China’s enormous output, accounting for about 40% of the world’s total. However, the refined lead metal, lead plate manufacturing, battery assembly, as well as the recycling of waste batteries and regeneration of various links, the workers harmful to the environment pollution. The consequences are increasingly shows that after a century of lead-acid batteries, enduring, with its need for energy storage room is mainly used in the ground, a large number of used vehicles must be controlled.

    Lithium, nickel limited resources, need to use a place too much power for the car battery is a throwaway, not a road to sustainable development. With lithium, nickel resources, limited substitution of petroleum resources, it is not wise. Pollution, lead-acid batteries can not be avoided, can do less is best. In order to replace the pollution it has generated emissions of greenhouse gases in internal combustion engine, an exercise is a tiger to wolf.

    If we really use lithium, nickel metal as the motive power batteries, and equipment in the new energy vehicles, and this is also the industrialization of new energy vehicles, but also exported, then this point enough resources for a few years? Should not be used for other purposes? (Bus bus one group of lithium batteries to 2 tons, while the lithium metal is about 280kg. Ni-MH battery of about 4 tons and its nickel how much, no one has published data).

    If we use lead-acid battery equipment, electric cars, electric buses, and the year may change a battery, then the large amount of amazing. Beijing City Bus a lead-acid batteries, weighing about 6 tons, a compact car needs a few hundred kilograms, (maintenance-free lead-acid battery-based storage capacity of its 35–40Wh/kg, while riding a bus if the 60 people, the number of its load quality, certainly not 6 tons. This is 6 tons of batteries installed in the vehicle bent forward to it every day to and from, its technical surely unreasonable, undesirable.

    We are developing new energy vehicles (electric), to replace the oil on a tight end in itself but in order to consume fewer resources, lithium, nickel metal, which Science? Viable? We have to eliminate fuel cars pollute the environment and the development of new energy vehicles, but used in the production and recycling process of batteries pollution affect human health, it worth it?

    Therefore, at present, new energy vehicles If you want to use this energy storage devices and storage means there is a need to explore his identity. Currently in the demonstration prototype stage, turned too late. “DDT” jokes will not be repeated here.

  • 19Nov

    Li-ion battery has a small, specific energy, long life, discharge performance is good. Just a few years, has been widely used in notebook computers, mobile phones, portable DVD and VCD and other devices, and with the development of production technology, as well as to further optimize the trend. Li-ion battery has so many advantages, while its manufacturing cost is relatively low, so is the future of the most promising portable batteries.

    For portable batteries, people want access to large-capacity power at the same time, we can try to reduce the weight of the system, increasing the efficiency and life of the battery. In addition, as portable devices, thermal conditions are generally poor, so the efficiency of the entire power supply system also made a higher demand.

     
    Switching power supply is characterized by the greatest efficiency. The use of switching power supply, can very effectively reduce the large-capacity battery charging system, power loss, thus greatly reducing the overall system heat.

« Previous Entries